Marlin Firearms, Henry Repeating Arms Scope Mount Rail Backup Day Sights Marlin Firearms Henry Repeating Arms Front Rifle Sights Marlin Firearms Henry Repeating Arms Scope Mount Rail Sights (primary target aim, secondary target aim) Marlin Firearms Henry Repeating Arms Rifle Scope Mount Base Rear Sight Backup Marlin Firearms Henry Repeating Arms Rear Backup Sight Picatinny Scope Mount Rail Marlin 1894 Picatinny Scope Mount Rail Picatinny Scope Mount Rail Marlin 308, 338, 336, 444, 45/70 Henry 30-30 45/70

Ranger Point Precision

Discount Combo Pack: Marlin or Henry Rifle Rail + Sight Set (10% off)

$70.00

Included in the box: one front sight, one rear rail mounted backup sight, one picatinny scope mount rail,one Torx star screwdriver bit, and four T15 Torx screws (recommend 2 drops Blue or Purple Loctite).

Prior to this first-of-its-kind integrated backup sights system, virtually all gun sights designed for use as a backup to primary optical scope systems, particularly on traditional, dropped comb rifles, force the shooter to a) remove the rear sight altogether (e.g. like a Williams Ace in the Hole) or b) mount the primary optical device in a high or otherwise unwieldy position.

Additionally, most sight systems have been a compromise between large, open apertures, which afford good light throughput at the cost of precision, or smaller “peep” apertures which afford better precision at the cost of poor light throughput.

Lastly, non-glass aiming devices - commonly referred to as iron sights - have only afforded one aiming point, with no provision for secondary aiming points "on the fly" for shooting at greater distances (how to set a primary and secondary aim point)

- Rapid target acquisition with bright, clear sight picture (day or night);
- Secondary “holdover” aiming point for "on the fly" shooting at greater distances;
- Flush mounted rear sight on our RHINO optics mounting rail.

- CNC machined from 7075 aluminum, anodized black (Lightweight, high strength, rust proof)

CHOOSE THE RIGHT FRONT SIGHT / REVIEW SUPPORT INFO (click to find out)

Which front sight height do I need?

How does rear sight elevation work?

How does front sight windage work?

How do I set my Primary and Secondary aim points?

RHINO Scope Mount Rails

- Better alignment than two-piece scope mounts; One of the lowest heights of any one piece mount (.35" Rhino, 5" or 6" lengths)

- Contoured bottom provides unshakeable stability on slightly domed Marlin receivers; 10 MOA machined in for more elevation flexibility (zeroes to 0-5 due of negative cant on rifle receiver)

- A set of four self-centering T15 Torx drive screws resist cam-out and offer the most stable and repeatable bond between rail and receiver

- 2X the recoil lug contact improves accuracy by eliminating scope movement under the harshest recoil

- See-through rail channel / rear sight allows for line of sight to front sight (even with a scope mounted)

- Compatible with most picatinny and weaver rings

Ranger Point Rear Backup Sight

- The brightest, clearest sight picture with a wide oval shaped aperture for good light throughput and scope-like view "reticle” bars" to align with front sight

- Elevation adjustable using the set screw from .340" to .450" height

- Flush mount onto the front of or RHINO rails (won't interfere with scope)

Ranger Point 3/8" Dovetail Front Sight Inserts

- Come in five heights including .235", .300", .365", .410" and .535" and are .25" wide.

- Standard 3/8" dovetail fits in barrel dovetail or into rifle's factory ramp with one set screw ("loose slip sight," recommend one drop of purple loctite)

- Triangular front sight shape with orange or green for easy target acquisition 

- Windage adjustable with set screw without the need for punches or hammers

- Horizontal elevation notches for "secondary aim" on the fly shooting from 100 yds to 200, 300...

Full Description
Marlin & Henry Scope Mount Rail Options *
Rail Mounted Backup Rear Sight *

Included in the box: one front sight, one rear rail mounted backup sight, one picatinny scope mount rail,one Torx star screwdriver bit, and four T15 Torx screws (recommend 2 drops Blue or Purple Loctite).

Prior to this first-of-its-kind integrated backup sights system, virtually all gun sights designed for use as a backup to primary optical scope systems, particularly on traditional, dropped comb rifles, force the shooter to a) remove the rear sight altogether (e.g. like a Williams Ace in the Hole) or b) mount the primary optical device in a high or otherwise unwieldy position.

Additionally, most sight systems have been a compromise between large, open apertures, which afford good light throughput at the cost of precision, or smaller “peep” apertures which afford better precision at the cost of poor light throughput.

Lastly, non-glass aiming devices - commonly referred to as iron sights - have only afforded one aiming point, with no provision for secondary aiming points "on the fly" for shooting at greater distances (how to set a primary and secondary aim point)

- Rapid target acquisition with bright, clear sight picture (day or night);
- Secondary “holdover” aiming point for "on the fly" shooting at greater distances;
- Flush mounted rear sight on our RHINO optics mounting rail.

- CNC machined from 7075 aluminum, anodized black (Lightweight, high strength, rust proof)

CHOOSE THE RIGHT FRONT SIGHT / REVIEW SUPPORT INFO (click to find out)

Which front sight height do I need?

How does rear sight elevation work?

How does front sight windage work?

How do I set my Primary and Secondary aim points?

RHINO Scope Mount Rails

- Better alignment than two-piece scope mounts; One of the lowest heights of any one piece mount (.35" Rhino, 5" or 6" lengths)

- Contoured bottom provides unshakeable stability on slightly domed Marlin receivers; 10 MOA machined in for more elevation flexibility (zeroes to 0-5 due of negative cant on rifle receiver)

- A set of four self-centering T15 Torx drive screws resist cam-out and offer the most stable and repeatable bond between rail and receiver

- 2X the recoil lug contact improves accuracy by eliminating scope movement under the harshest recoil

- See-through rail channel / rear sight allows for line of sight to front sight (even with a scope mounted)

- Compatible with most picatinny and weaver rings

Ranger Point Rear Backup Sight

- The brightest, clearest sight picture with a wide oval shaped aperture for good light throughput and scope-like view "reticle” bars" to align with front sight

- Elevation adjustable using the set screw from .340" to .450" height

- Flush mount onto the front of or RHINO rails (won't interfere with scope)

Ranger Point 3/8" Dovetail Front Sight Inserts

- Come in five heights including .235", .300", .365", .410" and .535" and are .25" wide.

- Standard 3/8" dovetail fits in barrel dovetail or into rifle's factory ramp with one set screw ("loose slip sight," recommend one drop of purple loctite)

- Triangular front sight shape with orange or green for easy target acquisition 

- Windage adjustable with set screw without the need for punches or hammers

- Horizontal elevation notches for "secondary aim" on the fly shooting from 100 yds to 200, 300...

Availability: During normal business hours (Mon-Fri), usually ships in 2-3 days
Current Stock:
Shipping Cost: Calculated at Checkout
Condition: New
Weight: 0.41 Ounces
Width: 5.00
Height: 0.75
Depth: 0.10
SKU: MHSMBS

Customer Reviews 5 (3 Reviews) Write a Review

Scope mount rail w/back up sight set
5 Stars

Bought this rail and sight set for my 1895G that I decided to scope due to my "aging" vision. I liked the idea of having a "B.U.I.S." like an AR type rifle and this fits that role perfectly. I was hesitant at first with the different sight picture vs a peep style but once I got out to the range with it I knew it was a non issue. I have no problems picking up the front sight and it seems faster to get on target with a more "open" view then a peep. I mounted a Leupold VXIII 1.5x6 on it with QD rings and it was darn near zeroed from the start. Very happy with this set up!

RP scope mount and backup sight rail
5 Stars

All my Marlins are iron sights, but I wanted to scope one for low light hunting situations. This is the best of both worlds. Solid top notch product. Texan/US made!

Top notch product!
5 Stars

I live in San Antonio and thought about driving over to save shipping. After the very fast and professional service I received from you, I’ll make sure to stop in next time I’m a little closer. I love the large loop lever… very well thought out and, aesthetically, the best looking one out there for sure. Your integrated rail / iron sights are pure genius. I predict you won’t be able to keep those in stock. It is way, way cool. You guys are doing great, keep it going.